Downloads
-
Using The PI System To Drive Dynamic Data Visualization
11/13/2019
Covestro’s story is a common one in the manufacturing world. The company had a wealth of data streaming in from equipment and processes: data that could theoretically be harnessed and acted upon. But its data was difficult to access, stored in local silos, and cut off from sharing and analysis by the lack of enterprise-wide data standards. The fix for Covestro: Making full use of its PI System.
-
Fixed Bed Catalyst End-Of-Run Prediction
10/16/2019
Are you challenged with managing the severity of reactor operation on a fixed-bed reactor and planning catalyst regeneration or replacement? It is important to analyze the catalyst activity and predict the end-of-useful life for the catalyst in order to optimize near and long-term economics. This process requires the calculation of normalized weighted average bed temperature, selecting historical data to “train” the correlations, and auto-updating with new data.
-
Heat Exchanger Monitoring And End-Of-Cycle Prediction
10/15/2019
Predicting end-of-cycle (EOC) for a heat exchanger due to fouling is a constant challenge faced by refineries. Proactively predicting when a heat exchanger needs to be cleaned enables risk-based maintenance planning and optimization of processing rates, operating costs, and maintenance costs. Read more to learn how utilitzing the Seeq Formula Tool to monitor heat exchanger performance in the place of time-consuming spreadsheets will eliminate weeks of work for engineers, freeing them up to perform other valuable company tasks.
-
Air Liquide Leverages The PI System™ To Realize A Tenfold Return From Increased Energy
10/1/2019
Founded in 1902, Air Liquide is one of the world’s largest suppliers of industrial gases, including oxygen, hydrogen and nitrogen. Spread across 80 countries, they serve approximately three million customers across multiple industries, including medical, oil and gas, chemical and electronics manufacturers.
-
DISOCONT® Tersus Measurement, Control and Supervisory System Datasheet
8/27/2019
DISOCONT® Tersus is a modular system for controlling continuous weighing and feeding applications. The controller is used wherever bulk solids need to be measured, fed or batched with the use of:
-
Skid-Mounted High Shear Powder Induction And Mixing System With Recirculation Tank
8/8/2019
The ROSS Model HSM-405SC-25 is an inline high shear rotor/stator mixing system incorporating SLIM (Solids/Liquid Injection Manifold) Technology. Unlike conventional eductors, the unique SLIM rotor/stator generates a powerful vacuum without the aid of external pumps and pulls powders directly into the mix chamber, promoting instantaneous wet out under high shear conditions. Mounted on a multipurpose skid with load cells, actuated valves and level switches, the pictured HSM-405SC-25 recirculates into a 400-gallon jacketed tank and is controlled from a 15” industrial PC with Windows.
-
MechaTron® Feeding Systems
7/31/2019
The revolutionary MechaTron® family of feeders, not only incorporates a superior feeder design that makes so much sense it could obsolete all others, but also brings the automation features that drastically reduce capital investment and installation costs.
-
MechaTron® Mid Range Coni-Flex Feeder Datasheet
7/31/2019
Volumetric and gravimetric MechaTron® "MC" Feeders feature a range of customer driven design attributes including AC or DC drive packages, and the ability to disassemble, clean, reconfigure, and service from the non-process side of the feeder.
-
No-Ledge Coupling Datasheet
7/31/2019
The Schenck Process No-Ledge coupling is designed for food and light industry conveying of fragile materials or materials requiring a high degree of sanitation. It can also be used for systems where color-changeouts are common; or for hazardous or inert materials where piping connections must maintain a positive seal.
-
MechaTron® Mid Range Coni-Steel Feeder Datasheet
7/31/2019
Volumetric and gravimetric “MS” MechaTron® Feeders feature a range of customer driven design attributes including all stainless steel construction, AC drive packages, internal agitator and helix configurations capable of feed rates up to 330 cubic feet (9,300 liters) per hour.