Downloads
-
EDIP Calculation Module Datasheet
7/26/2019
The EDIP Calculation Module is an innovative way to distribute the Schenck Process proprietary Enhanced Dilute Phase control algorithm for use with dilute phase pneumatic conveying control systems.
-
EDIP Controller Datasheet
7/26/2019
The EDIP Controller facilitates the operation of a dilute phase conveying system utilizing the Schenck Process proprietary Enhanced Dilute Phase control algorithm.
-
Enhanced Dilute Phase Conveying (EDIP) Datasheet
7/26/2019
Dilute phase pneumatic conveying is the most widely used form of air handling in the dry materials marketplace. The typical arrangement uses a blower package (pressure or vacuum) that is operated at full speed using across the line power (50/60 Hz depending on the locale).
-
Enhanced Dilute Phase Conveying
7/26/2019
Schenck Process has developed a method to "enhance" the operation of a dilute phase convey system by minimizing the speed of the blower under all operating conditions. EDIP translates the performance of the equipment being used into a tangible conveying velocity set by the user.
-
MechaTron® Mid Range Coni-Flex 3-A Feeder Datasheet
7/23/2019
3-A accepted feeder for food, dairy, and sanitary feeding applications. Crack and crevice-free contact surfaces. FDA compliant internal feed hopper. Volumetric and gravimetric configurations for feed rates up to 330 cu. ft. (9,300 liters) per hour.
-
MechaTron® High Range Gravimetric Feeder Datasheet
7/23/2019
"Heavy duty" and "configurable" are terms which accurately describe the "HC" MechaTron® feeder. The feeder is designed to accommodate feed rates in excess of 1,100 cubic feet per hour and headloads of up to 5,000 lbs.
-
MechaTron® High Range Volumetric Feeder Datasheet
7/23/2019
Heavy duty and configurable are terms which accurately describe the "HC" MechaTron® feeder. The feeder is designed to accommodate feed rates in excess of 1,100 cubic feet per hour and headloads of up to 5,000 lbs.
-
Engineering Site Surveys (Air Filtration Systems Datasheet
7/22/2019
Schenck Process provides engineering services to dust collection users that include on-site air filtration surveys. Program participants receive a full assessment of their current air filtration systems along with recommendations on improving efficiencies.
-
Helixes and Nozzles Datasheet
7/18/2019
Selecting the correct helix (screw, auger, etc.) and nozzle is critical to the performance of any dry material feeder. Over the last 40 years, Schenck Process has used application and lab-based experiences with more than 9,000 materials to develop an array of individual helixes, nozzles and specific combinations that have been field-proven to offer the best metering possible.
-
BEMP™ Single Idler Belt Scale
7/18/2019
Single-idler belt scales are commonly used in belt conveying applications to continuously measure and report flow rates and totalized material amounts.