Mixing and Blending Products
-
100 Gallon Sanitary Mixing Vessel
3/30/2009
Special 100 gallon capacity sanitary mix vessel constructed of type 316 stainless steel. This unit is mounted on a portable cart with a scale. Included is a tilt back air operated propeller agitator, vacuum design, a 100 psi jacket and a sanitary 180 grit finish.
-
Sanitary Mix Vessels
8/27/2003
Stainless Steel Sanitary Vessels are available in a variety of sizes and shapes. The vessels shown are all constructed in type 316 ss and are designed for vacuum operation. Each includes a variety of nozzles and a large manway for ingredient addition.
-
Vertical Blenders For Manufacturing
7/14/2017
Ross V-Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates. Normal cycle times are typically in the range of 15 minutes, however can be less depending on the difficulty of blending.
-
Cylindrical Ribbon Blenders: Model 42C
3/10/2014
The new line of Model 42C Cylindrical Ribbon Blenders are designed to mix dry powders, wet granulations, and paste-like materials with densities up to 100 lb/cubic foot. Available in many sizes from 1/2 to 1,000 cubic feet working capacity, Cylindrical Ribbon Blenders can be built for atmospheric, full vacuum, or internal pressure operation. A full range of standard, heavy-duty, and sanitary models are offered.
-
Fuel Testing
2/21/2013
The Rapid Small Scale Oxidation Test (RSSOT) is a new method to evaluate the storage stability of liquid fuels (gasoline, diesel, biodiesel/FAME & blends), grease or oil.
-
Two Gallon PowerMix
8/12/1998
The Model PD-2 two-gallon PowerMix is for the development of viscous mixtures requiring a combination of slow and high speed agitation
-
Sanitary VersaMix
10/30/1997
Charles Ross & Son Company’s Sanitary PVM 200-gallon VersaMix was designed to produce sanitary emulsions in short mixing cycles...
-
Ross-Lube Lubricant for Mixing and Blending
4/30/1998
Ross-Lube is for nearly all mixing and blending applications. The lubricant can reduce wear by
-
Double Cone Blender For Manufacturing
7/14/2017
Ross Double Cone Blenders design is most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates.
-
Double Cone Blender
2/24/2009
Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.