Downloads

  1. Used 50 Liter Pope Bioreactor 9/16/2024

    Used 50 liter Pope bioreactor, 316L stainless steel construction, approximately 16" diameter x 18" straight side, removable dish top, dish bottom, rated 100 psi and full vacuum at 350 f internal, jacketed for 100 psi at 350 f, top mounted .25 DC agitator drive, (4) baffles, mounted on cart with lift lift assist, serial# 140243-4-1, built 2006.

  2. Used Carr Centritech UniFuge Pilot Single Use Centrifuge/Separation System 12/28/2023

    Used Carr Centritech single use centrifuge separation system, model Unifuge, anodized hard coated T6061 AL bowl, approximately 140mm diameter, 1.8 liter capacity, 6200 max rpm, 3003 g force at bowl wall, 1 hp bowl motor, 0.1 - 4 liter/minute flow rate, jacketed housing, integrated peristaltic feed pump with .5 hp motor, with Allen-Bradley controls and PanelView Plus 1000 HMI, 115 volt, CE rated, serial# 748, built 2018,

  3. Used 79 Gallon Inox Reactor 10/31/2023

    Used 79 gallon (300 liter) Inox reactor, stainless steel construction, approximately 24" diameter x 34" straight side, dish lid top with dish bottom, jacket and interior rated 30 psi and full vacuum at 300 F, 6" top access, with (1) 4", (1) 3", (2) 2" and (2) 1.5" nozzles on top, with bottom entering magnetic agitator, .75 hp with controls, 1.5" center bottom outlet, with load cells, all on portable frame, serial# 95011-2, CRN# K82555, built 1995.

  4. High Shear Batch Mixers For Dispersions And Emulsions 2/7/2023

    High Shear Mixers equipped with the Solids/Liquid Injection Manifold (SLIM) Technology deliver powders in an efficient manner for quick wet-out and complete dispersion into low-viscosity liquids.

  5. 3,000 Gallon Storage Vessels 2/7/2023

    ROSS, a 180-year-old manufacturer of industrial mixing equipment, has grown into one of North America's most well equipped and respected custom fabricators of storage tanks, pressure vessels and reactors. The pictured US-made 3000-gallon custom-fabricated manufacturing vessels are built and stamped according to ASME Section VIII Div 1, constructed from type 304L stainless steel, and designed for full vacuum up to 200 psi internal pressure at 200 degrees F.

  6. Quantifying Automatic Control Improvements 1/25/2023

    Seeq's tools produce visuals with key metrics before and after control strategy implementations, enabling valid operational comparisons.

  7. Root Cause Oscillation Diagnosis 1/25/2023

    This use case guide details how process engineers can leverage Seeq to overcome challenges in manufacturing processes to root cause oscillation diagnosis.

  8. Increase Capacity Through Optimal Product Transition Scheduling 1/25/2023

    Seeq eliminates many time-consuming challenges during the transition period between production of different products by enabling SMEs to access all process and quality data required for the analysis in one place. 

  9. Aligning Data For Calculations And Correlation 1/25/2023

    By leveraging Seeq, engineering teams can establish a common time basis for joining and aligning data, then translate data values to earlier or later times to match up with other signal data.

  10. 5 Questions To Ask When Selecting An Advanced Analytics Solution 1/25/2023

    New advanced data analytics have a huge positive impact on the growing volumes of data in many sectors. Learn how to leverage these new analytics in process manufacturing.