Mixing and Blending Products

1. Double Cone Blender For Manufacturing 7/14/2017

   Ross Double Cone Blenders design is most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. 

2. PureFeed® Pharmaceutical Feeders 12/15/2009

   How did we create the best pharmaceutical-grade dry solids feeders? Simple. We involved an international group of pharmaceutical manufacturing and process people in the design and development process. Then together, we developed and shaped new patented technology into feeding solutions optimized for jet milling, blending, extruding, packaging, coating and formulating applications.

3. Cylindrical Ribbon Blenders: Model 42C 3/10/2014

   The new line of Model 42C Cylindrical Ribbon Blenders are designed to mix dry powders, wet granulations and paste-like materials with densities up to 100 lb/cu.ft. Available in many sizes from 1/2 to 1,000 cu.ft. working capacity, Cylindrical Ribbon Blenders can be built for atmospheric, full vacuum or internal pressure operation. A full range of standard, heavy-duty and sanitary models are offered.

4. Vertical Blenders For Manufacturing 7/14/2017

   Ross V-Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates. Normal cycle times are typically in the range of 15 minutes, however can be less depending on the difficulty of blending.

5. Sanitary Mix Tanks 7/6/2004

   Stainless Steel Tanks - This 1000 Liter Stainless Steel Sanitary tank is constructed of type 316 stainless steel

6. Double Cone Blender 2/24/2009
   Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.
7. Sanitary Mixer Brochure 6/13/2000

   The company has announced the completion of a new brochure describing their line of Sanitary Mixing, Blending, Drying and Dispersion equipment.

8. Ross-Lube Lubricant for Mixing and Blending 4/30/1998

   Ross-Lube is for nearly all mixing and blending applications. The lubricant can reduce wear by

9. V-Blenders 3/29/2009

   V-Blenders designs are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates.

10. Fuel Testing 2/21/2013

    The Rapid Small Scale Oxidation Test (RSSOT) is a new method to evaluate the storage stability of liquid fuels (gasoline, diesel, biodiesel/FAME & blends), grease or oil.