Charles Ross Products

  1. 185 Gallon Stainless Steel Kettles 1/3/2012
    Pictured are custom 185-gallon melt kettles rated for full vacuum and 250oF. Each hemispherical vessel is jacketed for 15-psi steam.
  2. Custom Process Stainless Steel Tanks 8/3/2011

    Charles Ross & Son is one of the best-equipped and most highly respected custom stainless steel tank fabricators in North America. We offer a combination of engineering and manufacturing resources that few fabricators can match.

  3. 100 Gallon Sanitary Mixing Vessel 3/30/2009
    Special 100 gallon capacity sanitary mix vessel constructed of type 316 stainless steel. This unit is mounted on a portable cart with a scale. Included is a tilt back air operated propeller agitator, vacuum design, a 100 psi jacket and a sanitary 180 grit finish.
  4. V-Blenders 3/29/2009

    V-Blenders designs are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates.

  5. Skid Mounted Static Mixing Systems 3/5/2009

    Charles Ross & Son Company, the leader in specialty mixing and dispersion equipment, is now offering complete skid mounted static mixing systems

  6. Double Cone Blenders 2/25/2009

    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending.

  7. Double Cone Blender 2/24/2009
    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.
  8. X-Series High Shear Mixer 1/23/2007
    The X-Series High Shear Mixer being offered by Charles Ross and Son Company is now being offered with several new optional design features.
  9. Vacuum Drying System 9/13/2006
    Complete Vacuum Drying Systems are available to meet the needs of each application. The systems typically include a mixer/blender, filter condenser, vacuum pump, and a condensate receiving vessel
  10. Ross Introduces New Cylindrical Vacuum Dryers 9/10/2006
    Charles Ross & Son Company has recently introduced a new line of Cylindrical Dryers for the chemical process industries.