Product/Service

Vibra Pad Discharge Aerators

Source: Cyclonaire Corporation
Vibra Pad aeration kits provide an economical, simple and proven solution to assist with difficult to discharge materials from your hoppers, bins, silos or bulk carriers
Cyclonaire Corporationeration kits provide an economical, simple and proven solution to assist with difficult to discharge materials from your hoppers, bins, silos or bulk carriers.

The Vibra Pad produces a unique combination of vibration and aeration to induce ready flow in most non-free flowing materials which may tend to bridge, hang up or pack during discharges.

Optimal aeration is achieved with quick and simple adjustment of source air volume and pressure.

Installation into the discharge vessel wall is quick and simple using components and notes supplied with the aeration kit.

APPLICATIONS

  • Increases flows and rates from bins, hoppers, silos and bulk carrier dischargers via simultaneous aeration and vibration.

    MATERIALS / CHARACTERISTICS

  • Any materials which tend to pack between discharges; bridge or slow-flow during discharge.

    CAPACITY

  • (Not applicable)

    BENEFITS & FEATURES

  • Metered pad air not only aerates / fluidizes material, but also produces a resonating vibratory wave into the discharge element to further aid material flow.
  • Use during convey operations to improve material flow to the feeder, as well as between non-use periods to maintain the aerated condition of the material.
  • Unique shape of the Vibra Pad boot provides excellent sealing qualities against a wide variety of bin wall surfaces.
  • Unaffected by moisture in material or supply air lines which may plug media-style aeration devices.
  • Built-in check valve displaces air in an even circumference, eliminating material back flow into the source aeration lines.
  • Specify: Neoprene or silicon pad for your material. Stainless steel stud is standard. Silicon temperature rated to 400°F.
  • Easy installation. Factory installation patterns available.
  • Kits include manifold piping, plumbing, fittings, and for high pressure air, required hoses and shut-off valves. Controls, solenoids and wiring are available separately.

    REQUIREMENTS

  • 5-60 psig air.

    <%=company%>, PO Box 366. York, NE 68467. TEL: 800-445-0730; FAX: 402-362-2001.