Product/Service

Typhoon Portable Propeller Mixers

Source: Sonic Corporation
Sonic's superior performance Typhoon Propeller Mixers and Agitators are used for mixing and agitating liquids and dissolving and suspending solids within liquids. Our propeller mixers provide longer life and greater stability and are a big step above your average catalog propeller mixer.

Click Here To Download:
•Catalog: Sonic Typhoon Mixers
•CAD Drawing: Sonic Typhoon Mixers

Sonic's superior performance Typhoon Propeller Mixers and Agitators are used for mixing and agitating liquids and dissolving and suspending solids within liquids. Our propeller mixers provide longer life and greater stability and are a big step above your average catalog propeller mixer. The Typhoon Propeller Mixers do it better! Our hollow shaft design and extra-wide bearing assembly provide the stability and durability needed for a long life. Most propeller mixers have shafts that are mounted to a motor by way of an inferior coupling held by set screws, subjecting the motor and drive assembly to vibrations caused by mixing. Our design prevents this!

Superior Design Features

  • Double-wide Bearings
  • Patented Hollow Shaft motor interconnect
  • Drive end isolated from shaft vibrations
  • Strong Aluminum Housing

Material Construction

  • 304 and 316L stainless
  • Cast iron
  • Teflon coating for shafts/props

Prop Speeds

  • 900 - 1800 rpm Direct Drive
  • 100 - 450 rpm Gear Drive
  • Variable w/ VFD controller
  • Variable w/ Air Drive Motors

Motors & Gearboxes

  • 1/4 to 10 horsepower
  • Electric motors: 110, 220-480, 575 volts AC; 1/3 phase; 50/60 Hz
  • Air drive motors
  • Gear drive motors
  • Stainless steel sanitary motors

Process Material

  • Water to 500 cps Direct Drive
  • 500 - 4000 cps Gear Drive
  • 5000 cps to creams
  • Heavy oil viscosities

Mounting Options

  • Clamp mount to vertical surface
  • 4-Bolt Base for horizontal
  • Flange and bung mount
  • Portable adjustable cart

In order to properly size a Typhoon Propeller Mixer, we must know the tank size, the fluid specific gravity, fluid viscosity and the type of material being mixed. If the depth of a tank is 4 times greater than its diameter, then 2 propellers are recommended for the job. When longer than normal shaft lengths are required, Sonic recommends a stabilizer ring welded to the OD of the propeller to prevent shaft wobble and deformation. Please complete our Mixer Request Form and we will get back to you to discuss:

  1. Motor horsepower, supply voltages, speeds
  2. Drive reduction; direct, gear, etc.
  3. Mounting options
  4. Shaft lengths
  5. Prop style; marine style, impellers, foils, etc.

If you have tech details on a current mixer and are looking for a replacement or improvement, then provide this info on our Mixer Request Form, otherwise a Sonic specialist will size the mixer and furnish a quotation. We will always call you promptly to discuss your interest in our mixers.

Click Here To Download:
•Catalog: Sonic Typhoon Mixers
•CAD Drawing: Sonic Typhoon Mixers