SmartBob Continuous Measurement
Source: BinMaster, Division of Garner Industries
SmartBob is a highly reliable on-demand level measurement system
BinMaster, Division of Garner Industries a highly reliable on-demand level measurement system for a variety of solid, slurry, and liquid materials. It links microprocessor based electromechanical remote sensing devices through PC, DCS, and PLC communication to create an affordable inventory management system with process control that works in the toughest environments.Continuous level measurement for solids, slurries and liquids
High speed, accurate measuring for an unlimited number of vessels
Reliable electromechanical technology unaffected by dust, temperature or angle of repose
PC, DCS and PLC compatible - RS-485 and 4-20 mA
Accurate material measurements with a resolution of .15 inch (.4 cm)
Simple wiring design reduces installation expense
Remote display and start units optional
Captive pulley system eliminates cable nesting
Nylon or Teflon coated SS cable for harsh environments
Air purge connection standard for dusty environments
Explosion proof units available
Standard mount 3" floor flange
Features
Specifications
|
|
Power Requirements: | 16 VAC 50/60 Hz |
Power Consumption: | 2VA
Continuous 36VA Intermittent (motor on) |
Current Draw: | 0.125A
Continuous 2.25A Intermittent (motor on) |
Operating
Temperature: With Heater: |
+32°
to +185°F (0° to +85°C) -40° to +185°F (-40° to +85°C) |
Pressure: | Atmospheric |
Measurement Range: | 1-150 ft. Standard |
Measurement Rate: | 2.0 ft./sec (typical) |
Measurement Accuracy: | 0.1 ft. (0.03m) |
Repeatability: | 0.1 ft. (0.03m) |
Resolution: | 0.15 inch (0.4cm) |
Communication: | RS-485 Half Duplex |
Wiring Distance: | 4000 ft. (1220m) |
Enclosure: | Type 4X, 5, 7,
9 and 12 Explosion Proof Class I Group C & D, Class II Group E, F & G |
Mounting: | 3-8" NPT Floor Flange |
Conduit Entry: | ¾" NPT |
Cable: | 304
Stainless Steel, 0.037" Diameter, Nylon Coated |
<%=company%>, 4200 N 48th Street, Lincoln, NE 68504; Tel: 402-434-9102. Fax: 402-434-9133.
This website uses cookies to ensure you get the best experience on our website. Learn more