Product/Service

Silver Seal II Paste

Source: IGS, Inc.
Applying Silver Seal II Paste Sealant to Joint Surface Apply Silver Seal II Paste Sealant to joint surface evenly as possibly with a spatula or by caulking a bead from a caulking gun
Applying Silver Seal II Paste Sealant to Joint Surface

Apply Silver Seal II Paste Sealant to joint surface evenly as possibly with a spatula or by caulking a bead from a caulking gun. Be sure the surface is free and clear of dirt and oil products. After material has been spread or caulked, assemble joint and tighten all bolts. Apply service heat to recommended curing program. Silver Seal II can be applied to warm surfaces up to 120°F. For best results, joint sealant spreads easier when surface is cold.

Surface Conditions

Smooth to rough is acceptable for silverseal.

IGS, Inc., 200 Country Club Road, Meadow Lands, PA 15347-0368. Tel: 724-222-5800; Fax: 724-222-5898.