Datasheet: Electromagnetic Flowmeter FXP4000

Metering flows in full pipe lines with electromagnetic flowmeters is today’s state of the art. ABB has developed a meter for metering flows in partially full pipe lines – the FXP4000 (PARTI-MAG II).

Its advantages 

• Metering without inverts – even in pipe lines with large downward slopes
  An invert shaft is no longer necessary. The slopes of existing pipe lines remain unchanged. Your construction-costs are reduced. Back flows have no effect on the measurements. Therefore your system can be operated without limitations or restrictions. 
• Easy installation, no on-site calibrations required
  The metering system start-up time is minimal. This increases the applicability and reduces your start-up costs.
•  High accuracy – even for low fill levels 
• Maintenance free metering system
  No mechanical wear, no added pressure drop, no moving parts or restrictions located in the meter. 
• Advantageous installation requirements
  Short in- and outlet straight sections (5x DN upstream and 3x DN downstream). Large downward pipe line slopes (up to 5%)