Roto-Mill Colloid Mills
Source: Sonic Corporation
Sonic's new 2004 RotoMill Colloid Mill and Grinding Mill is designed to provide superior shearing and grinding. Our Rotors and Stators are designed with a patented and proven multi-angular system.
Click Here To Download:
•Catalog: Colloid Mill
•CAD Drawing: Bench System
•CAD Drawing: Mill System
Sonic's new 2004 RotoMill Colloid Mill and Grinding Mill is designed to provide superior shearing and grinding. Our Rotors and Stators are designed with a patented and proven multi-angular system. There are 3 shear points that subject material to a higher degree of grinding than conventional mills. Undispersed material is forced into a cavity formed by a spinning Rotor and fixed Stator; centrifugal force propels the material to the outside of the Rotor, causing intense hydraulic shear that breaks agglomerates and homogenizes the solids and liquids.
•Catalog: Colloid Mill
•CAD Drawing: Bench System
•CAD Drawing: Mill System
•Catalog: Colloid Mill
•CAD Drawing: Bench System
•CAD Drawing: Mill System
Sonic's new 2004 RotoMill Colloid Mill and Grinding Mill is designed to provide superior shearing and grinding. Our Rotors and Stators are designed with a patented and proven multi-angular system. There are 3 shear points that subject material to a higher degree of grinding than conventional mills. Undispersed material is forced into a cavity formed by a spinning Rotor and fixed Stator; centrifugal force propels the material to the outside of the Rotor, causing intense hydraulic shear that breaks agglomerates and homogenizes the solids and liquids.
New 2004 Colloid Mill offers superior stability and performance. Features:
- New housing with double-wide bearings for better life and stability
- Removable Bearing Chamber allowing easier access and maintenance
- Removable Seal Chamber allowing easier access and maintenance and convenient change-over to flush type Seal
- Flush Mechanical Seal available for sanitary applications
- Insertable Stator easier to use and creates larger cooling area to prevent heat expansion
Production Colloid Mills
- Size 4 to 12 inch Rotor
- 5 to 30 horsepower Motors
- TEFC, XP, Atex, CE
- Complete Instrumentation; Gauges, Transmitters, Temp Sensors, etc.
- Available w/ VFD controller
- Complete w/ Feed Pumps as needed
- Complete System w/ integrated PLC and Operator Panel
Benchtop Colloid Mill and Grinding Mill Systems
Sonic's Benchtop Colloid Mill measures only 18 x 18 inches. It uses a 115 volt, 1 phase AC motor for convenient electrical hookup. This mill is used extensively for validation trials, re-formulation test work in the lab, and process development. These units are custom fabricated to meet your needs and can be built as a fully automated system with feed pump, PLC controls, instrumentation, etc. It scales up directly to any of our mills, including the new 2004 RotoMill designs.
Our Benchtop Colloid Mill is a completely automated system:
- Sanitary Feed Pump w/ Jacketed Hopper
- Lab Mixer for use with Premix Hopper
- 2.5 inch Colloid Mill
- VFD for Mill and/or Feed Pump
- Complete PLC automation
- Pressure Transmitter to regulate Feed Pump pressure to Mill
- Portable Cart
•Catalog: Colloid Mill
•CAD Drawing: Bench System
•CAD Drawing: Mill System
This website uses cookies to ensure you get the best experience on our website. Learn more