Product/Service

Repairing pipe supports

Source: RPP Pipe Supports & Bellows Pty Ltd.
RPP Pipe Supports & Bellows conduct refurbishment, re-calibration and testing on a number of products. Among these are virtually all makes of Constant Effort Supports and Variable Spring Hangers
RPP Pipe Supports & Bellows conduct refurbishment, re-calibration and testing on a number of products. Among these are virtually all makes of Constant Effort Supports and Variable Spring Hangers.
In the case of Constant Effort Supports, the units are dis-assembled and thoroughly inspected for wear and damage. The necessary repairs are carried out and new low friction bearings fitted. After assembly the units are assembled and tested to meet the specifications laid down and agreed upon with our client.

Variable Spring Hangers are, generally not able to be refurbished as most makes are designed and manufactured such that it is impossible to remove the spring without permanently damaging the housing. These units can however be tested and re-calibrated.

The new Carpenter & Paterson DV range of hanger does allow for the units to be stripped down to its component parts. It is therefore a very simple operation to refurbish these items, should it prove necessary.

RPP Pipe Supports & Bellows is the exclusive licensee in South Africa for the Carpenter & Paterson Ltd (WITCH) and Pipe Supports Ltd (COMET) ranges of pipe suspension equipment.

RPP Pipe Supports & Bellows Pty Ltd., PO Box 40169, Cleveland, Johannesburg, Gauteng, , ZA, 2022. Tel: +27 11 629 4624; Fax: +27 11 629 4605.