Product/Service

Powder Into Liquid Disperser

Source: Quadro Engineering Corp.
The Quadro Ytron™ XC Powder Disperser complies with 3A Sanitary Standards and is USDA accepted as a Full CIP Sanitary Design and Fabrication for Dairy Processing Equipment. The Quadro Ytron XC has a dual stage reactor housing designed specifically to incorporate and disperse large quantities of powders into a liquid stream in a single pass, without aeration...
The Quadro Ytron™ XC Powder Disperser complies with 3A Sanitary Standards and is USDA accepted as a Full CIP Sanitary Design and Fabrication for Dairy Processing Equipment. The Quadro Ytron™ XC has a dual stage reactor housing designed specifically to incorporate and disperse large quantities of powders into a liquid stream in a single pass, without aeration. The Quadro Ytron™ XC can be used continuously as part of an in-line process or as part of a batch process. The Quadro Ytron ™XC is available in two models, the Quadro Ytron™ XC1 and Quadro Ytron™ XC3.

Advantages of the Quadro Ytron™ XC are:

Performance

  • Concentrations up to 40% in a single pass.
  • Lump free dispersions, even at cold temperatures.
  • Higher product yield due to the intensive wetting of the powders.

Single Pass Operation

  • Repeatable, consistent product, batch to batch.
  • No product recirculating required, reduced batch times.

Inline Powder Incorporation

  • No unnecessary air entrainment.
  • No powder wastage.

Easy Clean-up

  • 3A Approved.
  • CIP.
  • Sanitary construction.

Downloads: