News | November 10, 2009

Non-Incendive, Intrinsically Safe, And Explosionproof Pressure Transmitters Available With 1/4" Female NPT In 316L Stainless Steel

clip

Mount Olive, NJ - American Sensor Technologies, Inc. (AST) has released its non-incendive, intrinsically safe and explosionproof pressure transmitter product lines with the option of ¼" NPT female pressure ports made from 316L Stainless Steel. 316L SS meets NACE MR0175 material requirements to prevent sulfide stress cracking from sour gas. This new thread will increase support for on-shore and off-shore markets. While AST's ½" NPT male pressure port has been gaining popularity in the oil field due to its large, non-clogging opening, the ¼" NPT female version gives customers the option to install products as retrofits for existing panels or sites. The ¼" NPT female has been a popular thread due to the lower price of mating connector fittings. The new thread reduces the overall length of the sensors to approximately 3.25 inches. While the AST hazardous area pressure transmitter products are already between one and three inches smaller than the competition, this latest option gives more room in the rest of the system and saves weight.

Customers can order ¼" NPT female pressure transmitters with non-incendive, intrinsically safe, or explosionproof ratings. The AST4300, AST4310 and AST43LP series combine to offer pressure ranges of 0-2.5 to 10,000 PSI for Class I Division II Non-Incendive Groups A, B, C, D applications. The same pressure ranges are available in the AST4400, AST4410 and AST44LP series rated for Class I Division 1 Intrinsically Safe Groups C, D with an approved barrier. Finally, the AST4600 will operate in Class I Division 1 Explosionproof Groups A, B, C, D areas and AST46HA in Groups C and D with pressure ranges from 0-50 to 10,000 PSIS. The letter "I" designates the ¼" NPT female pressure port in all models.

All products can be offered with AST's CSA ANSI/ISA 12.27.01-2007 Single Seal rating for pressure measurement applications in Canada.

SOURCE: American Sensor Technologies, Inc. (AST)