Multi-Stage In-Line Mixers

Multi-stage In-Line mixer has been specifically developed for those applications where a higher degree of shear is required than is available from the single stage standard multi-purpose In-Line mixers.

It's design quadruples the number of shearing actions per revolution of the rotor, resulting in substantially faster mixing times by reducing the number of recirculation passes required. The use of two concentric stators and multi-toothed motors also increases the number of products that can be processed in a single pass.

As material passes through the it's workhead, it is subjected to increasing rates of shear. The inner rotor subjects the product to an initial mixing action, reducing the size of large particles and producing a uniform pre-mix. The inner rotor also acts as the prime mover for the product, forcing it into the outer multi-bladed rotor/stator assembly where greatly increased tip speeds and shear rates complete the mixing cycle, producing a completely homogenous product.

Silverson Machines, Inc. 355 Chestnut St., P.O. Box 589, East Longmeadow, MA 01028. Tel: 413-525-4825. Fax: 413-525-5804.