Product/Service

Diverter Valve

Source: Cyclonaire Corporation
Cyclonaire's pinch style diverter valve is ideally suited for medium pressure (up to 85 psig) conveying when custom angle divergence or convergence of material flow is required
Cyclonaire Corporations pinch style diverter valve is ideally suited for medium pressure (up to 85 psig) conveying when custom angle divergence or convergence of material flow is required.

Unique construction and operation allows material to be shifted "on the fly" to change direction, without first stopping conveying and clearing the line.

Double wall construction for long life (even with highly abrasive materials) and obstruction-free flows are standard.

These valves are built to exceedingly heavy duty standards for value and performance.

APPLICATIONS

  • Proven for semi-dense, dense and dilute phase systems.
  • Ideal for multiple source convergence as well as multiple destination divergence.
  • MATERIALS / CHARACTERISTICS

  • Any dry material conveyed under high pressure.
  • CAPACITY

  • 2.0" through 12.0' dia., as per sizing charts, back side
  • BENEFITS & FEATURES

  • Custom built to fit any possible configuration / angle.
  • Material may be shifted "on the fly".
  • Pressure Ratings: Up to 85 psig depending on valve size.
  • Integral pressure switches indicate position for positive flow direction identification.
  • Designed for indoor / outdoor applications.
  • Double wall construction for long life.
  • Standard:
    -Carbon steel;
    -Open / close NEMA 4 limit switches.
  • Specify:
    -Over 12.0" diameter;
    -Flanged, plain or grooved pipe connections;
    -Custom angle configuration.

    REQUIREMENTS

  • 110 VAC. 50-60 Hz power.

    <%=company%>, PO Box 366. York, NE 68467. TEL: 800-445-0730; FAX: 402-362-2001.