Product/Service

All-Welded Plate Heat Exchangers

Source: Tranter PHE, Inc.
Maxchanger All-Welded Plate Heat Exchangers offer higher performance, in less space, at lower cost.
Tranter PHE, Inc.All-Welded Plate Heat Exchangers offer higher performance, in less space, at lower cost. These patented, compact, all-welded units transfer heat in much the same way as the Superchanger plate and frame heat exchangers, but do so without gaskets.

Because Tranter PHE, Inc.units are so compact, they occupy only 30-50% of space required for shell and tube heat exchangers in the same application. Single and multiple pass designs are available.

Counter-current flow of fluids is utilized in Tranter PHE, Inc.designs to provide a close temperature approach capability of less than 2°F.

Extremely high "U" values and low pressure drops are a result of the unique geometry of variable interspaces in the units. The specially embossed dimples on each plate provide maximum pressure-resistant heat transfer contact points. This design allows the units to be capable of running under high temperature/high pressure applications.

The units can be used in many duties where shell and tube units typically cool mechanical and electrical equipment-liquid-to-liquid, steam-to-liquid, gas-to-liquid, gas-to-gas and refrigerant applications (including ammonia).

<%=company%>, P.O. Box 2289, Wichita Falls, TX 76307. Tel: 940-723-7125. Fax: 940-723-5131.