LATEST HEADLINES

FEATURED PRODUCTS

Mechanical Rotamix System Mechanical Rotamix System
The Rotamix System is a mechanical mixing system designed for complete tank mixing, in lieu of conventional gas or draft tube type mixing...

Endress+Hauser offers continuous level measurement and point level detection in liquids and bulk solids

Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifi ce, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.
10 Litres/Min is delivered from the new Peak Scientific hydrogen generator. The system is also capable of pressures...
A paradigm shift is taking place today and FDA regulations that once restricted change are now enabling the adoption of new technology by the pharmaceutical industry. This change increases the need for an automation and control system that can support process control and knowledge management for better product quality and faster delivery.
Alfa Laval offers an eight-page, full-color brochure explaining its pretesting methods for improving process performance before equipment decisions are made
SENSYCON, a division of Bailey-Fischer & Porter, is launching the new TS 01 HART-compatible Temperature Transmitter
The M-140K Microfluidizer Processor provides the highest shear rates of all available mixers and homogenizers on the market today. With process pressures ranging from 8,000 to 40,000 psi, the M-140K maximizes the energy-perunit fluid volume resulting in uniform submicron particle and droplet sizes.

Liquid Filling--Accommodates a wide variety of liquid filling applications and fluid types. Easily read touch screen with electronic volume adjustment controls for speed and ease of setup. A variety of metering systems are available including piston, flowmeter, and lobe that can provide consistent results with wide range of fills up to 200+ cpm. Design models offer CIP (clean in place) or COP (clean-out-of-place)options.

SPECIAL FEATURE

Tackle Your Toughest Interface Challenges

Reliable interface level measurement keeps production flowing. If liquids are not separated effectively, you face processing problems, equipment failures, production loss, fines and shutdown. That's why Magnetrol® matters. Our technologies are proven to accurately measure total level and interface layers. Because when it comes to interface, level matters. Learn more.