|
|
Understanding Flow Meters And Their Pros And Cons | By Ron DiGiacomo, ABB Measurement Products | One of the most critical measurements in the processing industries is rate of flow. Flow metering technologies fall into four classifications: velocity, inferential, positive displacement, and mass. This article summarizes the considerations in selecting and applying these flow meters and provides examples of the kinds of flow meters in each category. |
|
|
|
By Fluid Components International | National Fire Protection Association (NFPA) Code 30 defines safeguards to reduce the hazards associated with the storage, handling, and use of flammable and combustible liquids. In the U.S., NFPA codes are recognized and enforceable under OSHA and many state and local regulations. |
|
|
|
| White Paper: The Advantages Of Mixing Under Vacuum | Many of the advantages of mixing, blending, and drying under vacuum have been recognized for years. But until recently, vacuum has also been widely misunderstood. Many processors have considered vacuum essential — and cost-effective — only for the most demanding applications. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FEATURED PRODUCTS AND SERVICES |
|
|
|
