LATEST HEADLINES

FEATURED PRODUCTS

meddrum_trans2_1.jpg Drum Transfer System

Flexible Containment for offloading drummed materials in a safe and efficient manner is provided by the Drum Transfer System (DTS) platform.

The Signet 2552 Metal Magmeter from Georg Fischer features all-stainless steel construction. The PVDF nosepiece and FPM O-rings are the only other wetted materials.

Bunting Magnetics Co., manufacturer of an extensive line of magnetic metal separation equipment,...

Nominal Rated Melt Blown Depth Cartridges

Shown here is the Munson CIM-18-SS

Used 157 sq ft Atlas shell and tube heat exchanger, (100) 1" diameter x 6' long 304 stainless steel tubes, tube sheets rated 75 psi at 125 f, carbon steel shell rated 50 psi at 250 f, serial# 4735, national board# 3897, built 1981.

ABB Instrumentation is scheduling regional Process Measurement and Control seminars across the U.S.
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifi ce, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.

Filamatic is your single source solution for fully integrated pharmaceutical liquid filling and packaging lines. Whether you have your own preferred supplier or would like us to recommend one, we can integrate just a liquid filler and capper to a full production line.

SPECIAL FEATURE

Tackle Your Toughest Interface Challenges

Reliable interface level measurement keeps production flowing. If liquids are not separated effectively, you face processing problems, equipment failures, production loss, fines and shutdown. That's why Magnetrol® matters. Our technologies are proven to accurately measure total level and interface layers. Because when it comes to interface, level matters. Learn more.