Mixing and Blending News

  1. Ross Introduces Laboratory High Viscosity Disperser Model PBA-2
    8/15/2013

    Ross introduces a Laboratory High Viscosity Disperser featuring interchangeable bow-tie and paddle blades driven by a 2HP explosion-proof, VFD-capable motor. Suitable for use with standard 5-gallon pails, this bench-top mixer is ideal for thorough blending of fluids with very different viscosities, quickly resuspending dense solids that have settled during transport or storage, preparing thick paste-like formulations and other similar applications.

  2. Static Mixers Offered For Turbulent And Laminar Flow Mixing
    5/10/2004
    Charles Ross & Son Company, the leader in specialty mixing and dispersion equipment, offers two economical designs of its Static Mixers. The LPD, Low Pressure Drop model, is typically used for low viscosity turbulent flow mixing of fluids and for gas-liquid, gas-gas mixing. This design is offered in many materials of construction up to 60 inches diameter
  3. Improved Powder Injection In Batch Mixing Systems
    12/19/2011
    The Ross Solids/Liquid Injection Manifold (SLIM) is a high shear mixer system designed to accelerate the dispersion of hard-to-wet-out solids while eliminating floating powders in batch tanks and reducing dusting in the mixing area.
  4. Ross Appoints New Asian Regional Sales Manager
    2/28/2011
    Bogard Lagman, the former Executive Vice President of Charles Ross & Son Company has been appointed the new Regional Sales Manager for Asian and Middle Eastern countries.
  5. Ross Stocks Sanitary V-Blenders
    2/10/2009
    The V-Blenders design is most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates.
  6. Mixing & Blending Control System Literature Available From Ross
    6/3/2008
    Ross has announced the completion of new 14-page literature covering its line of Control Systems used with Mixing, Blending, Drying and Dispersion equipment.
  7. Selecting the Right Blade to Optimize Mixing
    11/18/2003
    The key to solving tough blending problems and meeting ambitious goals for throughput and product quality is often unconventional thinking. Faced with the challenge of blending a slurry of extremely dense materials, then drying the batch to form a light, fluffy powder, your first thought would probably be to rely on a traditional vacuum dryer...
  8. Ross Now Stocks Three Sizes Of Sanitary V-Blenders
    8/19/2008
    The V-Blenders design is most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture.
  9. Charles Ross Announces New Solids Powder Wetting System Offered
    11/8/2010
    Charles Ross & Son Company, the world leader in rotor/stator mixing technology, recently announced a new in-line powder induction system.
  10. Ross Offers New PowerMix Planetary Disperser For No-Charge Testing
    2/11/2013

    Ross Technical Director Ken Langhorn announces the addition of a new 10-gallon PowerMix Planetary Disperser to the Ross Test & Development Center.