KOMAL INDUSTRIES

1. Purified Water Generation Systems 8/24/2018

   Each plant for the production of purified water is custom made, whether its capacity is 100 l/h or over 25 m3 /h. Every plant is designed with the customer and all the design parameters in minute details and with the same passion and dedication towards building an effective, safe and reliable system. After all each customer has a different system requirement: An SME engaging in contact manufacture has need which differs from an international conglomerate. Thus no plant is entirely like any other. ALL KOMAL PW basic systems meet EP, USP and guidelines and ensure the production process, product quality and profitability. The GMP-compliant confirms to FDA and ISPE requirements.

2. Purified Water and WFI Storage Tanks 8/24/2018

   After the purification of PW or HPW, engineering of the customer-specific storage and distribution system takes place, so product water can be delivered to each point of use in the sterile distribution system without recontamination. Here to we consider the customer's specific conditions and produce an individually engineered design.

3. Purified Water and WFI Distribution Systems 8/24/2018

   Once the PW is stored in a tank, it now needs to be distributed to each and every point of use in the factory without recontamination.

4. Ultra Pure Water Systems 8/24/2018

   Komal manufactures complete system to meet very special application for the Research lab and electronic industries. Water produced will meet the standards like CAP, ASTM, USP, NSST etc. Standard units having flowrate of 5/10/30 lit/hr. is readily available. Units are microprocessor based controlled with replaceable cartridges.

5. Komal Reverse Osmosis System 8/24/2018

   KOMAL industries is a Water Treatment Plant manufacturing company dedicated to offer to our customers the finest commercial, industrial and medical Reverse Osmosis system. We are committed to provide the most innovative, technologically advanced and high quality system. Our knowledge and experience enable us to manufacture most of our parts in-house to ensure system reliability. Our meticulous quality assurance program ensures system reliability and a product that you can depend on.

6. Demineralization Systems 8/24/2018

   Water is one of the most abundant natural compounds. It is also one of the most contaminated one. A number of minerals readily dissolve in to water. They have to be removed from the raw water before it can be used for any industries application.

    

7. Ozone Generators 8/24/2018

   KOMAL manufactures a Corona Discharge Ozone Generator and Ozone application Engineering Including dissolution column, air preparation unit and Ozone destruction. 'OZ1 series of Ozonator Generator operate exclusively on oxygen feed gas, Eliminating the need of Air preparation unit. For the smaller requirement of ozone 'OZ' Series Ozone Generator is very efficient, reliable and very cost - effective.

8. Electrode-Ionization Systems 8/24/2018

   KOMAL "ED" series of Electrodeionization unit employs EDI technology to produce high purity water. EDI process systems replace conventional Dl mixed bed resins unit to produce deionized water. KOMAL EDI does not require shutdowns to regenerate the resins with chemicals or replacing resins. Consistent high purity Ultrapure water having resistivity of 12-15 Mohm .cm can be produced.