Products and Services
HC Series Conveyor
Source:
Cyclonaire Corporation
The HC Series is a high capacity, side inlet, vacuum loaded semi-dense phase conveyor best suited for powdered materials which are abrasive or fluidizable, with capacity to 80+ TPH
The HC Series is a high capacity, side inlet, vacuum loaded semi-dense phase conveyor best suited for powdered materials which are abrasive or fluidizable, with capacity to 80+ TPH.High capacity transfers with vacuum loading.
Bulk carrier, IBC & bulk bag unloading / In-plant transfer.
Side inlet vacuum loading. Fluidizable materials which are abrasive. Up to 80+ TPH. Semi-dense phase uses medium pressure blower air to convey material at intermediate line velocities (<2000-3000 fpm) and high material-to-air-ratios (50-20) for low abrasion.
No costly pits.
Integral dust separation for reduced venturi wear.
Less operator supervision via automated controls.
Specify: Load cells; Portable or stationary; Carbon steel, stainless steel or epoxy coated; Multiple inlets; Butterfly outlet valve. 110 VAC, 50-60 Hz; 12 VDC.
15 psig convey air ; 90-100 psig control air @ 3-5 scfm.
Medium pressure blower air is used to venturi-vacuum load and convey material at intermediate line velocities and material-to-air ratios for less abrasive wear and particle degradation. Integral dust separation is included.
The unit is capable of multiple applications, from bulk carrier, IBC and bulk bag unloading to in-plant transfer. With optional load cells, the HC Series can also weigh and batch with inventory control.
APPLICATIONS
MATERIALS / CHARACTERISTICS
CAPACITY
BENEFITS & FEATURES
REQUIREMENTS
Cyclonaire Corporation, PO Box 366. York, NE 68467. TEL: 800-445-0730; FAX: 402-362-2001.
