Products and Services
CB Series Blend-Veyor
Source:
Cyclonaire Corporation
The CS Series is a vacuum loaded semi-dense phase blender and conveyor best suited for multiple-source powdered, granular or palletized abrasive and friable materials, with capacity to 20+ TPH
The CS Series is a vacuum loaded semi-dense phase blender and conveyor best suited for multiple-source powdered, granular or palletized abrasive and friable materials, with capacity to 20+ TPH.Blending / Bulk unloading / In-plant transfer / Scaling / Batching.
Combined blending and conveying in one unit.
Excellent solution for rotary airlock replacement with difficult applications. Powdered, granular, palletized materials which are abrasive or friable. 5 – 20 + TPH. Proprietary combined blending (two or more materials) with semi-dense conveying. Uses a single 15 psig positive displacement blower for vacuum-pressure conveying at low line velocities (<2000-3000 fpm) and high material-to-air-ratios (50-20) for less product degradation and less abrasive line wear.
Vacuum or vacuum assisted load via single or multiple inlets from any direction(s) without costly pits or overheads – giving economy and flexibility.
No pits required.
Less operator supervision via automated controls.
Standard: Carbon steel; load cells; NEMA 4 controls and two inlets.
Specify: Portable or stationary; Stainless steel or epoxy coated; Multiple inlets. 110 VAC, 50-60 Hz; 12 VDC.
15 psig convey air ; 90-100 psig control air at 3-5 scfm.
Medium pressure blower air is used to venturi-vacuum load and convey two or more materials at lower line velocities and higher material-to-air ratios, minimizing abrasive wear and particle degradation.
The unit is capable of multiple applications, from blending, bulk carrier unloading or in-plant transfer. The CB Series also weighs and batches with inventory control.
APPLICATIONS
MATERIALS / CHARACTERISTICS
CAPACITY
BENEFITS & FEATURES
REQUIREMENTS
Cyclonaire Corporation, PO Box 366. York, NE 68467. TEL: 800-445-0730; FAX: 402-362-2001.
