By Charles Ross and Son Company
This white paper presents some basic best practices for efficient processing in a ribbon blender. The ideas discussed here are recommendations based on practical and technical experience gained by Ross over several decades as a leading supplier of ribbon blenders to the process industries worldwide.
This report describes how density and sound velocity are used to determine the concentration of sulfuric acid and oleum in various industrial processes. The report covers an overview of sulfuric acid production, typical installations, theory of measurement, along with a summary of benefits of measuring on-line.
A large copper mine and refinery in the western U.S. had a dilemma. Their cell house, which contains over 1,500 cells, each holding more than 20,000 gallons of electrolyte, had experienced severe corrosion and structural degradation of the support columns for the tanks. These columns support the cells in their solvent extraction and electrowinning process. This process entails immersion of a stainless steel cathode or "starter plate" into the electrolyte.
Oxygen demand is a vital parameter for determining the amount of organic pollution in water. Oxygen demand measurement is widely applied in monitoring waste loadings of treatment plants and in evaluating treatment effectiveness.
3M 740 series filter housings are ASME Code vessels specifically designed to accommodate the 740 series high-capacity filter elements. The housings are available in a standard design, as well as in customizable configurations to suit your specific needs.
The Model 54e family of analyzers, with the appropriate sensors, monitor and control pH/ORP, conductivity/resistivity, dissolved oxygen (ppm and ppb level), free chlorine, total chlorine, or ozone in a variety of process liquids.