The recently introduced Rosemount Analytical 6888 In-Situ Flue Gas Oxygen Analyzer is used for industrial boilers, process heater furnaces, kilns — any type of combustion process. The analyzer adjusts the fuel/air ratio of your process in order to maintain the optimum efficiency while keeping NOx and CO2 low — very similar to the oxygen sensor that is used in your automobile. Watch this video to learn how the 6888 can meet your process needs! Click here.
Polymer Linings For Restoration And Corrosion Protection Of Steel Surfaces By Greg Severyn, Sauereisen Inc., Greg Wiggins, Pacific Concrete Protection, and Greg Bracey, New Zealand Refining Co.
An analysis of the two failed coatings applied previously showed that a high permeance of the coatings and the presence of pinholes in the coating were the primary cause of the failures. Both were approximately 65% solids by volume bisphenol A epoxies which had been applied in three coats to a total film thickness of 15 to 16 mils.
With today's economic pressures, more plant managers and others charged with conveying powders, granular items, and flakes for packaging are adopting the automatic operation of vacuum conveying and packaging equipment as standards to hit critical price points for market success.
Rising raw material costs, environmental sustainability, and a global economy are some of the future challenges for the chemical industry. In order for production processes to run at peak performance, highly accurate, rugged, and easily integrated field instrumentation are needed.