Model 7H Horizontal Rotormill
This new generation of the horizontal Rotormill is designed to handle non-homogeneous materials as well as highly dense and abrasive materials. The Model 7H is designed so that it can easily be opened in half allowing for full maintenance exposure. It can also be easily disassembled to replace or repair wear surfaces due to the nature of the abrasive material. Partial pre-separation of the metals can be accomplished by use of a "drop-out box."
The Rotormill Model 7H is manufactured in sizes from 100-hp to 750-hp and can be equipped with wear resistant liners and grinding plates, and is also capable of performing drying applications for filter cakes and pastes that have poor material handling properties when wet.
IPEC formed in 1980 to custom-design processing solutions and to provide for customer oriented needs over non-flexible standard machines. They offer a comprehensive line of Rotormill Pulverizers and Rotordryer Spin Flash Dryers in a wide range of sizes and capacities, from their 15-hp model through their largest machine which boasts 750-hp.
Rotormills are engineered, assembled, balanced and tested at their facilities located at 9300 Route 130 North in Pennsauken, New Jersey. IPEC also offers a complete testing laboratory equipped with a wide variety of pretreatment and feeding equipment as well as powder collection equipment. In addition to size reduction, they provide drying, mixing, coating and blending. The laboratory is equipped to perform moisture testing and both manual and automatic laser size analysis on both ground and unground materials.
International Process Equipment Co (IPEC), 9300 Route 130 North, Pennsauken, NJ 08110. Tel: 856-665-4007; Fax: 856-665-3991.