By MIDAC Corporation
A Fourier transform infrared spectrometer was built by MIDAC Corporation specifically to identify and quantify impurities in ultra-high-purity nitrogen, helium, argon, and instrument air. One of the difficulties with optical measurements is that a purge must be maintained on the optical enclosure, which due to its large surface area and material composition tends to off-gas, releasing water and carbon dioxide as well as other contaminants.
Today's chemical plants face escalating costs and tightening EPA control requirements. Sierra thermal mass flow meters provide the precise, useful data plants need. They can make a significant difference in all the following applications.
When Resolute Forest Products was determining a solution for rehabilitation and protection of their 50,000-square-foot concrete clarifier damaged from mild chemical attack and abrasion from their pulping process they contacted MBI Corexcel, a local corrosion-resistant specialized contractor, for assistance.
When processors face expenditures to purchase equipment to adapt to industry changes or production demands, they turn to toll processors for help. However, when toll processors are confronted with industry changes, they are in a unique position of having to adapt in order to continue servicing their clients.
V-MAX is a coreless filter that flows from the inside-to-outside like a bag filter, but V MAX technology can offer the same online life as a bag filter in a vessel that is roughly half the diameter. This is possible since the V-MAX design offers up to 10 times the available filtration media in the same element envelope.
The SmartPave dynamic shear rheometer (DSR) is based on the technology of Physica MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO TP5.