Clean Air Diverters & Valves

Our clean air diverters and valves provide superior performance. Mac Process experts can help you select the right valve for your product, process and usage to solve common problems and deliver uncommon value. 

Our clean air diverters and valves provide superior performance. Mac Process experts can help you select the right valve for your product, process and usage to solve common problems and deliver uncommon value.

Mac Process provides a versatile range of clean air diverters.  Available in 22.5 degree, 30 degree, 45 degree and 90 degree divert angles for use in diverting air-conveyed or gravity-flow products into either of two destinations; or from either of two sources to one destination.

Convey Diverters

Butterfly Scale Diverter

The heavy duty butterfly mounts directly to the top of the receiver bin to solve low head room requirements and facilitate accurate scaling/weighments into the receiver.  The fill/pass arrangement allows multiple bins to be serviced.  Suitable for line pressures up through 15 psi.

BV Diverter

The BV valve is designed for powder handling applications at line pressures up to 1 barg and has a machined housing with Teflon packing gland seals, bronze shaft bushings and flanged 68 kg drilling inlet and outlet connections.

PT 45 Diverter

The PT 45 diverter features a tunnel that rotates 45 degrees port to port with no contamination. This valve includes a positive food grade rubber silicone seat at each port, and can be used in convey line applications operating at line pressure up to 5 barg.

PV Diverter

The PV Diverter is equipped with a plug and is designed for pellet handling applications at line pressures up to 1 barg. It features machined housings with Teflon packing gland seals, bronze shaft bushings and flanged PN10 or ASA 150 lb. drilling inlet and outlet connections.

SD Diverter

SD valves discharge into scale hoppers and feature a stainless steel diverting blade and extended spout to minimize carryover of product from the scale hopper. The valve includes a replaceable resilient urethane sleeve to provide a tight seat for the diverting blade.

Sealed Blade Line Diverter

These valves divert product at a 30 degree angle. This valve features a heavy-duty wear blade with a synthetic polymer insert to seal against the valve and plates.

YV Diverter

These valves feature a stainless steel diverting blade that diverts at a 22.5 degree angle. The valve includes a replaceable resilient urethane sleeve to provide a tight seat for the diverting blade. Units are designed for system operations up to 1 barg.

Gravity Flow Diverters

Gravity Flow Diverters feature a urethane seal sandwiched between 3mm plates and include flanges on all connections. Gravity flow diverters are for use in gravity-flow systems only, operating at pressures less than 50 Mbar and temperatures less than 25 degrees C.

GA Diverters

The GA diverter is designed to divert product flow from one source to two use points within a gravity system. The angle of each leg is 30 degrees off vertical center line.

GY2 and 3 Diverters

The GY2 and 3 diverters are designed for gravity systems with one straight through leg and a second leg to divert product flow at 30 degrees. GY3 diverters are three-way, gravity flow product diverters.

Air Diverters

AD Air Diverters

The AD Air Diverter is designed to direct the flow of clean air from an air source to one of two use points. It can also be used for one of two air sources delivering to one use point.

DV Dump Valves

The DV Dump Valves are designed to direct the flow of clean air from a vacuum filter receiver, or loader to a vacuum source. The dump valve allows multiple vacuum receivers to share one common vacuum blower.