IMO Grants Final Approval To Siemens' Ballast Water Management System
It is estimated that more than 50,000 vessels will require retrofitting to meet new provisions
The Maritime Environmental Protection Committee of the United Nations’ International Maritime Organization (IMO) has granted Siemens Final Approval for its SeaCURE ballast water management system. The Final Approval is based on a directive issued by the IMO, a specialized agency of the United Nations, which requires all deep-sea vessels to operate IMO-approved ballast water management systems. The objective is to avoid the spread of alien aquatic organisms and pathogens carried in untreated ballast water. The IMO directive will come into force in the near future and will entail retrofitting approximately 50,000 sea-going vessels worldwide.
For its SeaCURE system, the Siemens Industry Automation Division received Basic Approval back in 2010, as the first leg of a two-tier certification process by the IMO. By granting Final Approval, the IMO confirms the new Siemens ballast water management system’s environmental compatibility and compliance with the safety standards. TheSeaCURE system is a further development of the Chloropac system, which has seen 35 years of successful ship-board use for treating seawater cooling circuits. The electrolytic system produces hypochlorite from the salt contained in seawater.
The SeaCURE system consists of a filtration stage followed by electrochlorination and a dosing unit which precisely meters the addition of hypochlorite. Electrochlorination occurs in a sidestream of the ballast water main. Only about one percent of the ballast water to be treated is carried through the system’s electrolysis cells. This makes for small system components which are easily integrated into existing vessels. Another key advantage of the SeaCURE system lies in the fact that it is not only used for treating ballast water but also for treating cooling water circuits on board. Since ballasting occurs only during very short periods in a ship’s lifetime, conventional ballast water systems remain idle 95 percent of the time. By contrast, the SeaCURE system can be used all the time, eliminating the need for an additional system for treating cooling water. The Siemens system is particularly suited for vessels above a gross tonnage of 35,000.
Water treatment equipment is an important part of Siemens’ marine technology product offering. Siemens also specializes in the design, manufacture and commissioning of electrical ship propulsion systems for all types of merchant vessels, naval vessels and submarines worldwide.
SeaCURE and Chloropac are trademarks of Siemens and/or its affiliates in some countries.
Further information about solutions for water treatment is available at: http://www.siemens.com/sicure
Further information about solutions for water treatment is available at: www.siemens.com/water
The Maritime Environmental Protection Committee of the United Nations’ International Maritime Organization (IMO) has granted Siemens Final Approval for its SeaCURE ballast water management system.
About The Siemens Industry Sector
The Siemens Industry Sector (Erlangen, Germany) is the world’s leading supplier of innovative and environmentally friendly products and solutions for industrial customers. With end-to-end automation technology and industrial software, solid vertical-market expertise, and technology-based services, the Sector enhances its customers’ productivity, efficiency, and flexibility. With a global workforce of more than 100,000 employees, the Industry Sector comprises the Divisions Industry Automation, Drive Technologies and Customer Services as well as the Business Unit Metals Technologies. For more information, visit http://www.siemens.com/industry
About The Siemens Industry Automation Division
The Siemens Industry Automation Division (Nuremberg, Germany) supports the entire value chain of its industrial customers – from product design to production and services – with an unmatched combination of automation technology, industrial control technology, and industrial software. With its software solutions, the Division can shorten the time-to-market of new products by up to 50 percent. Industry Automation comprises five Business Units: Industrial Automation Systems, Control Components and Systems Engineering, Sensors and Communications, Siemens PLM Software, and Water Technologies. For more information, visit www.siemens.com/industryautomation
SOURCE: Siemens Industry, Inc. - Water Technologies