Conveyor Belt Scales

For continuous flow rates up to 15,000 tons per hour, Schenck AccuRate’s BEMP single idler belt scale combines quality, performance, and affordability in a modular package that can be shipped from stock. Whether your conveyor uses 18” (450 mm) or 60” (1,500 mm) – wide CEMA idlers, the BEMP easily mounts to your conveyor frame using only (4) bolts. Using (2) NTEP-approved single point load cells and the Schenck INTECONT Satus Integrator, accuracies of ±1% of totalized weight are possible when used on a Schenck-approved conveyor.

Click Here To Download:
•Spec Sheet: BEMP™

APPLICATION:
Single-idler belt scales are commonly used in belt conveying applications to continuously measure and report flow rates and totalized material amounts. Applications include:

• Measurement of throughput and/or material consumption
• Reporting of alarm conditions
• Totalizing batch weights for load-out stations

OPERATION:
"Material weight," measured by the BEMP™ Belt Scale and "belt speed" are multiplied by the INTECONT® Satus Integrator to produce a "flow rate" value. Flow rate is then integrated by the INTECONT® Satus to produce a "totalized weight" value. Note: For variable speed conveyor belts, an optional speed sensor can be used in place of a belt speed parameter.

CONSTRUCTION:
The modular BEMP™ Belt Scale features epoxy painted, mild steel construction and is suitable for use with trough or flat idlers 18" to 60" (450 mm to 1,500 mm) CEMA. Stainless steel construction is available as an option.

LOAD CELLS:
(2) NTEP-approved, single-point, stainless steel, strain gauge load cells with rated capacities of 66 lbs., 132 lbs., 220 lbs., 330 lbs., or 660 lbs. (30, 60, 100, 150, or 300 kg). The load cells are mounted in compression for optimum accuracy.

ACCURACY:
+/- 1% totalized weight over a 3:1 design capacity range when installed on a Schenck-approved conveyor. Dual-idler belt scales with ± 0.5% accuracy are also available.

OVERLOAD PROTECTION:
Positive mechanical stops are provided for optimum protection.

OPERATING TEMPERATURE RANGE:
+0° F to +110° F

CALIBRATION:
Via static test weights (supplied)

Click Here To Download:
•Spec Sheet: BEMP™